Contact Us   
Your Position: Home > News > Company News

specifications: 5 mm to 200 mm HDPE Sheets, Polyethylene Sheets, PE Sheets

2014/6/4      view:

5 mm to 200 mm HDPE Sheets, Polyethylene Sheets, PE Sheets

HDPE Sheets, Polyethylene Sheets, PE Sheets is a kind of high crystallinity, nonpolar thermoplastic resin.Square one HDPE appearance has milk-white, in a small cross section in a certain degree of translucent.

HDPE Sheets, Polyethylene Sheets, PE Sheets has excellent resistance to most of the life and the characteristics of industrial chemicals.Some kinds of chemical produce chemical corrosion

Corrosion, such as corrosive oxidant (nitric acid), aromatics (xylene) and halogenated hydrocarbon (CTC).The polymer is not hygroscopic and has a good waterproof steam, can be used for packaging purposes. HDPE Sheet, Polyethylene Sheet, PE Sheet has the very good performance, especially high insulation dielectric strength, make it very suitable for wire and cable.In the level of high molecular weight has excellent impact resistance, even at room temperature under 40 f low temperature are so.A variety of unique characteristics of grade HDPE is the appropriate combination of four basic variables: density, molecular weight, molecular weight distribution and additive.Different catalyst is used in the production of customized special performance polymers.These variables combine to produce different USES of the HDPE grade;In performance to achieve the best balance.Has good chemical stability, can resistance to most acid, alkali, organic solution and water erosion.Good electrical insulation

performance

HDPE SheetPolyethylene SheetPE Sheet With high toughness, tensile strength, corrosion resistance, good low temperature resistance, good wear resistance.In chemical industry, clothing, packaging, food and other fields have a wide range of applications.Can be filled, flame retardant, modification, the surface can be embossed, frosted.LDPE properties (high pressure low density polyethylene) is soft, low mechanical strength, the melting point is lower, is suitable for thin film and cable insulation.HDPE (low density polyethylene) larger rigidity, high mechanical strength, also a high melting point.Suitable for making hollow products, injection molding products, etc., widely used in the manufacture of rink wallboard. 

HDPE Sheet

Thickness: 1-350 - mm  x 1m x 2m, or 1.2m x 2.4m

color: grey, white, blue, yellow, gray, black, green, etc.