specifications: 5 mm to 200 mm Nylon Sheet
specifications: 5 mm to 200 mm Nylon Sheets, Nylon Plates
Size: 1-200 - mm * 500/1000 mm * 1000/2000 mm
Nylon Sheets, Nylon Plates is one of the most important engineering plastic series.This product is widely used, covering almost every field, are five of the most widely used in engineering plastics.
Nylon (Nylon Sheets, Nylon Plates ), Polyamide, Chinese English name Polyamide (PA), is on the main chain molecules containing repeated amide groups, thermoplastic resin.Its name by the synthesis of monomer on the specific number of carbon atoms.Is America's largest chemical industry company ─ ─ dupont famous chemist carothers and his team.Nylon is one of the most important engineering plastic series.This product is widely used, covering almost every field, are five of the most widely used in engineering plastics.
Nylon Sheet, Nylon Plate main features:
Mechanical strength, stiffness, hardness, high toughness, good ageing resistance, good mechanical damping capacity, good sliding resistance, excellent wear resistance, good machining performance, when used for precision control, no creep phenomenon, anti-wear performance good, good dimensional stability.
Application fields of nylon sheet:
Nylon Sheet, Nylon Plate Widely used in chemical machinery, anti-corrosion equipment gear making bad material and parts.Wear parts, transmission parts, home appliance parts, automotive parts, wire rod to prevent the machine parts, chemical machinery parts, chemical equipment, etc.
The performance of the nylon sheet
The physical properties of the nylon plate is very good, mechanical toughness and strength and similar metal;The anti-fatigue performance of nylon sheet and aluminum alloy, cast iron are the same.And good chemical stability of nylon plate: alcohol, weak base, copper, esters, hydrocarbons, grease, etc. To nylon board doesn't work.
Good abrasion resistance of Nylon Sheet, Nylon Plate : the coefficient of friction generally 0.1 0.3, is the 1/3 of babbitt, 1/4 of bakelite, is a kind of very good self-lubrication material.At the same time, the nylon plate has very good cold heat resistance: it has the highest resistance to temperature limit is 100 ° C, the lowest for 60 ° C, in this case to maintain a certain mechanical strength to work normally.
Nylon plates mechanical properties is also very good, and have high tensile resistance, surface hardness, flexural strength and impact strength and high ductility.
Nylon sheets density is small, light in weight per unit volume) : its density between 1.05 to 1.15.
Use nylon pipe instead of copper tube can be very intuitive see liquid flows, bending can according to customer's need for freedom.
|Typical Properties||Test Standard||Unit||Typical Value||Typical Value||Typical Value|
|(Conductive PA6)||(Antistatic PA6)||(Insulation PA6)|
|I. Physical Properties|
|Water absorption||ISO 62||%||11||9||9|
|Tensile strength at yield||ISO 527-2||MPa||73||80||80|
|Tensile strength at break||ISO 527-2||MPa||/||/||/|
|Elongation at break||ISO 527-2||%||>41||>50||>50|
|Modulus of elasticity after tensile test||ISO 527-2||MPa||/||/||/|
|Modulus of elasticity after flexural test||ISO 178||MPa||2650||3000||3000|
|Hardness-Shore D||DIN 53505||75||75||75|
|Charpy impact strength at 23°C||ISO 179||kJ/m2||4.6||5.5||5.5|
|Friction coefficient||DIN 53375||0.32-0.39||0.38-0.45||0.38-0.45|
|Heat deflection temperature-HDT/A||ISO 75-2||°C||55-75||55-75||55-75|
|Max.service temperature-Short term||°C||≤180||≤180||≤180|
|Max.Service Temperature-Long term||°C||/||/||/|
|Thermal conductivity at 23°C||DIN 11359||W/(K*m)||0.28||0.28||0.28|
|Coefficient of linear thermal expansion||ISO 11359||10-4*K-1||0.7-1.0||0.7-1.0||0.7-1.0|
|Dielectric constant at 1MHz||IEC 60250||106HZ||3.5||3.5||3.5|
|Dielectric loss factor at 1 MHz||IEC 60250||106HZ||0.023||0.023||0.023|
|Surface resistivity||IEC 60093||Ohm(Ω )||≥104||≥108||≥1012|
|Dielectric strength||IEC 60243-1||kV/mm||>52||>56||60|